LIGHTING SYSTEM CONTROLLERS & ACCESSORIES
Harness the power of color with RGB LED Controllers designed from the ground up to take your sign project to the next level! RGB LED modules can emit various colors of light. To get the most out of them, Allanson has developed a line of Controllers designed to bring color mixing and animating to your fingertips.
4 Channel Power Repeater (ACL-PR-4CH-5A)
- PWM Signal Amplification: Boosts the PWM (Pulse Width Modulation) RGBW signal for consistent and synchronized LED control across multiple strips or fixtures.
- High Load Capacity: Supports up to 5A per channel, with a combined total of 5A across all channels, ensuring compatibility with high-power LED setups.
- 3kV Isolation: Features 3kV isolation with high-speed optocouplers for enhanced safety and protection against electrical surges.
- Extended Reach: Ideal for extending the reach of LED controllers in large or complex installations.
- Signal Integrity: Prevents signal loss or degradation, maintaining uniform brightness and color consistency in high-power LED setups.
- Supports multiple RGBW channels, allowing for flexible and scalable lighting setups.
- Compatibility: Compatible with a wide range of LED controllers and lighting systems.
- Reliable Performance: Designed for long-term, reliable operation.
- Compact Design for efficient space utilization.
- LED Power Indicator: Provides visual feedback for power status.
- Operating Temperature: -20°C to +55°C.
ACL-SC-DMX Sub-Controller
- Control of RGBW Colors Through a Single Output Channel (intensity, brightness, dimming, and fading).
- Electronically Programmable DMX Channel Capabilities. Eliminating issues associated with DIP switch settings found in other controllers.
- Seamless Interoperability with Other DMX Devices. Supporting the daisy-chaining of multiple DMX decoders.
- Well-Suited for Indoor and Outdoor Settings. Ensuring durability and reliability, rain or shine.
- Emulating LED to Identify Output LED Colors.
- Overload Protection and Short-Circuit Protection. Safeguards both the decoder and the connected fixtures.
RJ45 Adapter (ACL-SIG-AD)
- RJ45 to Spring-Cage Terminal Conversion: Converts RJ45 cable connections into individual spring-cage terminals for easy integration.
- 8-Pin Terminal Block: Supports all 8 wires in a standard RJ45 connection for full functionality.
- Ethernet Cable Compatibility: Works with Ethernet cables for high-speed data transmission.
- Durable Housing for Indoor/Outdoor Use: Sturdy and compact design, built for industrial and DIY indoor/outdoor environments.
- Tool-Free Installation: Spring-cage terminals allow for quick, secure wiring without the need for special tools.
- Versatile Use: Suitable for connecting control/networking devices to other devices or for data transmission in custom applications.
- Wide Application Range: Ideal for lighting controller wiring, DIY electronics projects, and networking setups.
- Outdoor Environmental Protection: Includes protection against high humidity, making it suitable for challenging environmental conditions.
Transmitter: ACL-SPI-EXT-Tx | Receiver: ACL-SPI-EXT-Rx
- TTL to Differential Conversion: Converts standard TTL SPI signals to differential signals using a dedicated transmitter, reducing noise and signal degradation over long distances.
- Differential to TTL Conversion: Converts received differential signals back to TTL levels for standard SPI interfacing via a dedicated receiver.
- Extended Signal Range: Extends the operational range of SPI communications from a few feet to hundreds of feet (minimum 300 feet), depending on the environment and cable quality.
- Noise Immunity: Uses differential signaling and Ethernet cables to minimize electromagnetic interference (Emi), ensuring reliable signal transmission in noisy environments.
- Multi-Voltage Support: Compatible with both 3.3V and 5V TTL-SPI logic levels, providing versatility across various lighting systems and LED devices.
- High-Speed Data Transmission: Supports SPI data rates up to several Mbps, depending on specific implementations and distance.
- Compact Form Factor: Designed for seamless integration into existing systems with minimal space requirements.
- Plug-and-Play Operation: Simple, intuitive installation with minimal configuration required, allowing for quick and easy setup.
- Power Supply Flexibility: Operates on a wide range of input voltages, from 12V DC to 24V DC, ensuring flexibility across power supply configurations.
- Integrated reverse polarity and short circuit protection, ensuring safe operation.
- LED Power Indicator: Provides visual feedback for power status.
- Operating Temperature: -20°C to +55°C.
- Outdoor Environmental Protection: Includes protection against high humidity, making it suitable for challenging environmental conditions.
4xSPI Range Extender ACL-SPI-Tx/4-SPL/0
- Signal Range Extension: Extends the reach of SPI signals over long distances, making it ideal for complex installations where signals need to cover large areas.
- High-Speed Data Handling: Supports high-speed SPI data rates, meeting the demands of fast and responsive LED displays and lighting systems.
- Multi-Voltage Support: Compatible with both 3.3V and 5V TTL-SPI logic levels, providing versatility across various lighting systems and LED devices.
- Compact and Robust Design: Designed to easily integrate into existing setups without occupying excessive space.
- Plug-and-Play Operation: Simple, intuitive installation with minimal configuration required, allowing for quick and easy setup.
- Power Supply Flexibility: Operates on a wide range of input voltages, from 12V DC / 24V DC, ensuring flexibility across power supply configurations.
- Integrated reverse polarity and short circuit protection, ensuring safe operation.
- LED Power Indicator: Provides visual feedback for power status.
- Operating Temperature: -20°C to +55°C.
4xSPI Splitter & Range Extender (ACL-SPI-Tx/0-SPL/4)
- Single Channel to 4 Split Channels: Splits and amplifies a single SPI signal into four independent channels, enabling long-distance transmission without signal degradation.
- Signal Integrity Maintenance: Ensures signal integrity and stability, preventing degradation and ensuring reliable communication over extended distances.
- High-Speed Data Handling: Supports high-speed SPI data rates, meeting the demands of fast and responsive LED displays and lighting systems.
- Multi-Voltage Support: Compatible with both 3.3V and 5V TTL-SPI logic levels, providing versatility across various lighting systems and LED devices.
- Compact and Robust Design: Designed to easily integrate into existing setups without occupying excessive space.
- Plug-and-Play Operation: Simple, intuitive installation with minimal configuration required, allowing for quick and easy setup.
- Power Supply Flexibility: Operates on a wide range of input voltages, from 12V DC to 24V DC.
- Integrated reverse polarity and short circuit protection, ensuring safe operation.
- LED Power Indicator: Provides visual feedback for power status.
- Operating Temperature: -20°C to +55°C.
ACL-MC-DMX-1U DMX Controller
- 6 selectable modes. Buttons (8), Pages (10), Zones (1).
- Color (99 RGB + 8 RGBW).
- Commands from the contacts (speed, scene, dimmer, zone).
- Time clock setting adjustable manually in stand alone.
- 16-bit and fine channel amnagement.
- Automatic scene recovery if the power is cut off.
- Cross fade time between scenes.
- Turn off display after 4s., default start scene, dimmer and RGB color selection.
- Master/Slave mode with up to 32 devices combined and synchronized (64 universes).
ACL-ADPPC Addressable Pre-programmed Controller
- Controls from 8 to 1020 modules
- 16 Preset Programs
- Adjustable Speed, direction, fade, and strobe
- Maximum RF transmission distance is 130 ft line of sight
- Maximum distance from controller to first module or between modules is 60 ft
- Non weatherproof
- Wireless remote and 120V AC power adaptor included
- Dimensions: 5.30” L x 1.18” W x 0.79” H
ACL-SCD120-DMX – 120 WATT SUB-CONTROLLER
- Runs up to 80 modules of RGB3 DMX System or 12 ft of RGB Rigid Border Tubing
- Uses economical 12V DC or 24V DC Class 2 power supplies
- 5 built in dip switch preset programs
- Operates independently or as part of system
- Dimensions: 4.06” L x 2.63” W x 1.13” H
DISCONTINUED – REPLACED BY THE ACL-SC3C4A-DMX 3 CHANNEL DECODER
ACL-SC3C4A-DMX – DMX 3 CHANNEL DECODER
- Runs up to 80 modules of RGB3 System or 12 ft of RGB Rigid Border Tubing
- Uses 12V DC or 24V DC
- 8 built-in dip switch preset programs
- Operates independently or as part of a system
- Dimensions: 4.92 ” L x 2.52” W x 1.57” H
- Non weatherproof
ACL-MC-DMX – 512 CHANNEL MASTER CONTROLLER
- 512 Channel, 170 sub-controller capability
- Links sub-controllers together
- Multiple signs can be addressed individually
- Stores up to 32 user defined programs
- Uses DMX 512 protocol signal via XLR interface
- Can be powered by 120V AC adaptor (included) or USB port (optional)
- USB programming interface
- Day, hour and minute time setting capability
- Adjustable speed, fade and strobe.
- Maximum distance from DMX master controller to sub-controller is 200 ft
- Non weatherproof
- Dimensions: 7.13” L x 4.75” W x 1.56” H
ACL-PPMC-DMX – PRE-PROGRAMMED MASTER CONTROLLER
- 16 sub-controller capability
- 32 preset programs available
- Develop your own color with 255 level of each red, green, and blue
- Microphone for sound control
- Adjustable speed and intensity
- Non weatherproof
- Maximum distance from DMX master controller to sub-controller is 200 ft
- Dimensions: 3.82” L x 2.36” W x 1.57” H
ACL-ADC-SPI – ADDRESSABLE CONTROLLER
- Enormous capability of controlling up to 21000 modules
- 14 Programs can be stored with SD card
- Day, hour, and minute time setting capability
- Maximum distance from controller to first module or between modules is 60 ft
- 120V AC power adaptor, channel adaptors, jumper cables, and SD card and SD card reader included
- Operates independently without sub controller
- Dimensions: 8.00″ L x 4.94” W x 1.85” H
- Non weatherproof
ACL-WIFI-103 – WIFI-CONTROLLER
- Stand-alone Non-DMX system
- 32 preset programs and 9 user defined colors via remote control (Remote control sold separately)
- Controls up to 80 modules of RGB3 System or 12 ft of RGB Rigid Border Tubing
An extra 80 modules per unit or extra 12 ft of RGB Rigid Border Tubing with the same lighting effects can be achieved with the ACL-3063-3A Power Amplifier. - Maximum Wi-Fi control distance is 320 ft using the smart phone app
- Max RF transmission distance is 95 ft line of sight via remote control
- Non weatherproof
- Dimensions: 5.02” L x 2.87” W x 1.75” H
ACL-T3-RC | Remote Control for ACL-WIFI-103
- Full color touch panel
- RF transmission distance is 95 ft line of sight
- 32 preset programs and 9 user defined colors
- Dimensions: 6.61″ L x 3.78″ W x 1.34″ H
ACL-WIFI-106 – WIFI-CONTROLLER
- 5 in 1: DIM/CT1/CT2/RGB/RGBW mode
- Apple iOS/ Android OS applicable
- Workable with mobile devices & remote
- Programmable
- Connected to WiFi directly or by a router
- Zone control (Max 12 zones)
- Lighting timing
ACL-WR-F4-3A | Wireless Receiver for ACL-WIFI-106
- RF 2.4GHz wireless signal, no need for signal cable
- Dimming, CT, RGB, RGBW LED lights can be controlled
- Compatible with F series remote
- Support APP if equipped with ACL-WIFI-106 gateway
ACL-T3-CV | Constant Voltage Receiving Controller
- Wireless receiver with built-in antenna
- Max wireless distance is 200 ft open area
- Dimensions: 7″ L x 1.90″ W x 1.30″ H
ACL-RGB-CATV-BOOSTER | RGB Booster
- Boosts the DMX signal an extra 400 ft when used with the Allanson Signal Cable or an extra 200 ft when used with the CAT5 Cable
- Multiple boosters can be used
- Dimensions: 5.25″ L x 2.75″ W x 2″ H
ACL-ARTNET-DMX | DMX512/Network Converter
- Sending DMX signal over IP networks
- Can be configured in two ways: DMX512 to Network or Network to DMX512
- Dimensions: 7.80″ L x 3.07″ W x 1.97″ H
ACL-ARTNET-OPENID | DMX512/Network Converter
- Sending DMX signal over IP networks
- Can be configured in two ways: DMX512 to Network or Network to DMX512
- Open IP range configuration
- Dimensions: 5.12″ L x 2.36″ L x 1.58″ H
ACL-SPI-SA | SPI Signal Amplifier and Splitter
- Extends the SPI signal distance an extra 100 ft when used with the Allanson Signal Cable or an extra 60 ft when used with the CAT5 cable
- Multiple amplifiers can be used
- Dimensions: 4″ L x 1.25″ W x 1.25″ H
ACL-3063-3A | Power Repeater
- IP68 Waterproof
- Constant Voltage power repeater
- Duplicates RGB signal
- Multiple repeaters can be used
- Dimensions: 6.42″ L x 1.38″ W x 1.10″ H
ACL-12/24V-DMR – LED 12/24 VDC DIMMER
- LED dimmer solution for 12/24 volt class 2 power supplies
- Manual adjustment 0 to 100% brightness
- Compatible with all 12V and 24V Constant Voltage DC power supplies
- Eliminates current surges and maintains the life of LED’s
- Can dim up to 5 Amp load (CV125-120)
- 12V and 24V LED modules can be dimmed by using this Dimmer
- Convenient 4 wire plug in terminal block
- Simple one piece design
ACL-DMX-CBL-100 | Signal Cable
- Shielded 3 wire signal cable
- 100 ft per spool
- UL Recognized